|
|
Materials
| Various, materials are used in the manufacturing or installation
of electrical components. The following entries supply standards for
some of the more common materials. |
| Standard: |
IEC
326-3 - Design and Use of Printed Circuit Boards - Withdrawn
| | Purpose: |
Part three of IEC 326 relates to the design and the application
of a printed boards. This standard has been superseded by the following
series:
IEC 61188-1-1 Bilingual Printed boards and printed board assemblies
- Design and use - Part 1-1: Generic requirements - Flatness considerations
for electronic assemblies
IEC 61188-1-2 Bilingual Printed boards and printed board assemblies
- Design and use - Part 1-2: Generic requirements - Controlled
impedance
IEC 61188-5-1 Bilingual Printed boards and printed board assemblies
- Design and use - Part 5-1: Attachment (land/joint) considerations
- Generic requirements
IEC 61188-5-2 Bilingual Printed boards and printed board assemblies
- Design and use - Part 5-2: Attachment (land/joint) considerations
- Discrete components
IEC 61188-5-6 Bilingual Printed boards and printed board assemblies
- Design and use - Part 5-6: Attachment (land/joint) considerations
- Chip carriers with J-leads on four sides
|
|---|
| Criteria: |
Specify the standard name, general or specific criteria
|
|---|
| Usage: |
... shall comply with IEC 326-3, (criteria)
|
|---|
|
| Standard: |
NEMA LI1 - Industrial Laminated
Thermosetting Products
| | Purpose: |
This standard includes practical information concerning the
manufacture, testing, and performance of laminated thermosetting
products in the form of sheets, rods, and tubes used in the manufacture
of electrical apparatus and supplies. They represent general practice
in industry, and assist users in the proper selection of laminated
thermosetting products. Various grades and standards are available
within this specification.
|
|---|
| Criteria: |
Specify the standard name, selection criteria
|
|---|
| Usage: |
Printed circuit boards (PCBs) shall be of glass epoxy construction,
complying with NEMA LI1, grade FR-4,
|
|---|
|
| Standard: |
ASTM D2671 - Standard Test
Methods for Heat-Shrinkable Tubing for Electrical Use
| | Purpose: |
These test methods cover the testing of heat-shrinkable tubing
used for electrical insulation. Materials used include poly(vinyl
chloride), polyolefins, fluorocarbon polymers, silicone rubber,
and other plastic or elastomeric compounds. This standard is frequently
called out by wire and cable specifications, with specific physical
test property requirements.
|
|---|
| Criteria: |
Specify Standard, physical property test performance criteria
|
|---|
| Usage: |
ASTM D2671, physical property test performance criteria
|
|---|
|
| Standard: |
MIL-DTL-5015H - General
Specification For Connectors, Electrical, Circular Threaded, And
Type
| | Purpose: |
This specification covers circular threaded electrical connectors
with slaughter or removable crimp contacts (both front and rear
release). These connectors are for use in electronic, electrical
power, and control circuits.
Electrical connectors covered by this specification are divided
into the various classes, series, and receptacle styles.
|
|---|
| Criteria: |
Specify Standard, Class, series, and receptacle styles of connector
(or general compliance)
|
|---|
| Usage: |
... shall conform to MIL-DTL-5015H (class, series, type)
|
|---|
|
|
|