Number
|
Description
|
Status
|
ANSI Z98.1 |
Steady-State Thermal Transmission
Properties |
(Superseded by ASTM C177) |
ASTM A502 |
Steel Structural Rivets |
(Discontinued) |
ASTM D1683 |
Test Method for Failure in Sewn
Seams of Woven Fabrics |
(Discontinued 1999 pending revision,
but per ASTM still a viable test procedure) |
ASTM D2262 |
Test Method for Tearing Strength
of Woven Fabrics by the Tongue (Single Rip) Method (Constant-Rate-of-Traverse
Tensile Testing Machine) |
(Discontinued 1995) |
FED-STD-191 |
Textile Test Methods
* Although "Inactive" this standard is still referenced extensively in other
active standards |
Inactive (*) |
FS-DD-G-451 |
Glass, Float or Plate Sheet |
(Canceled, reference to ASTM C1036 ) |
FS-SS-T-312 |
Federal Standard - Tile, Floor, Asphalt,
Rubber Vinyl, Vinyl-Asbestos |
(Canceled, reference to ASTM F1066, F1700
) |
IEC 326-3 (60326-3) |
Design and Use of Printed Circuit Boards
|
(Superseded by IEC 61188-series)
|
MIL-A-9067 |
Adhesive Bonding, Process and
Inspection Requirements |
(Canceled, no SS Document) |
MIL-C-5015 |
Connectors, Electrical |
(Canceled, Superseded by MIL-DTL-5015)
|
MIL-C-83933 |
Corrosion Preventive Compounds
for Vehicle Applications |
(Canceled, no SS Document) |
MIL-HDBK_132 |
Protective Finishes for Metal
and Wood Surfaces |
(Canceled, no SS Document) |
MIL-H-21040 |
Honeycomb Materials, Water Migration
Resistance Type, Structural Paper Base |
(Canceled, no SS Document) |
MIL-P-8053 |
Plywood, Metal-Faced |
(Canceled, no SS Document) |
MIL-P-21035 |
Paint, High-Zinc Dust Content,
Galvanizing Repair |
(Canceled, no SS Document) |
MIL-R-5757H |
Relays, Electromagnetic, General
Specification For |
(Canceled, no SS Document)
MIL-PRF-6106L may be used in place (more restrictive) |
MIL-STD-275 |
Replaced by IPC-D275, and Replaced
by IPC-D2221 |
Canceled/ replaced |
MIL-STD-454 |
Standard General Requirements
for Electronic Equipment |
(Canceled, Superseded by MIL-HDBK-454)
|
MIL-STD-2000 |
Standard Requirements for Soldering
Electrical and Electronic Equipment (called by MIL-HDBK-454 for soldering,
but has also been canceled) |
(called by MIL-HDBK-454 for soldering,
but has also been canceled) |
MIL-STD-45662 |
Calibration Systems
Requirements |
Canceled - (refer
to ISO-10012-1 and ANSI-Z540-1 or comparable standards as alternatives to
MIL-STD-45662) |
MIL-W-22759/x |
Wire, Electrical, Fluoropolymer-Insulated,
Copper or Copper Alloy |
(Canceled, Superseded by SAE
Series SAE-AS22759/x) |
MIL-W-81381 |
Wire, Electric, Polyamide-Insulated,
Copper or Copper Alloy |
(Canceled, no SS Document) |
|
|
|
NEMA WC 3
NEMA WC 5
NEMA WC 7 |
(AKA ICEA S-19-81) WC 3 -
Rubber-Insulated Wire & Cable for the Transmission & Distribution of Electrical
Energy.
(AKA ICEA S-61-402) WC 5 - Thermoplastic-Insulated Wire & Cable for the
Transmission & Distribution of Electrical Energy.
(AKA ICEA S-66-524) WC 7 - Cross-Linked-Thermosetting-Polyethylene-Insulated
Wire & Cable for the Transmission & Distribution of Electric Energy |
These standards have been rescinded
and replaced by WC 70, WC 71, and WC 74, which contain the same material
and updates, but are organized by application in place of type. |
|
|
|
|
|
|
|
|
|